LEAP Bridge Enterprise yazılım grubu ile küçük ve orta ölçekli her türlü betonarme köprüyü modelleyebilir, analiz edebilir ve detaylandırabilirsiniz: prekast, yerinde-dökme, betonarme ve ard-çekmeli. Bu kapsamlı köprü bilgi modelleme sistemi ile köprünün geometrik modellemesi, altyapısı ve üst yapısı bir arada analiz ve tasarımı gerçekleştirilir. Akıllı veri yönetimi, parametrik modelleme ve otomatik çizim üretimi ile projenizi verimli ve hızlı bir şekilde tamamlarsınız.

Proje bilgilerinin direkt olarak tanımlanabilmesi – köprü geometrisi, malzemeler, yüklemeler, öngerilme halatları konumlama ve kesme donatıları - tasarımda esneklik ve kolaylık sağlar.

Tek bir arabirim içinden 4 özel modüle erişimle çalışmalarınız gerçekleştirilir:

• LEAP GEOMATH – Parametrik köprü modelleme ve tasarım 
• LEAP CONBOX – Ard-çekmeli, beton kutu kirişli, T-kirişli ve döşeme tabliyeli köprüler için analiz, tasarım ve yükleme
• LEAP CONSPAN – Prekast ve öngerilmeli beton köprüler için analiz, tasarım ve yükleme
• LEAP RC-PIER – Beton temel, ayak ve abatman analiz ve tasarımı

Tasarım için kullanılabilecek Şartnameler:

• Amerikan Association of State and Highway Transportation Officials (AASHTO):
  • AASHTO Standard (LFD: Load Factor Design)
  • AASHTO LRFD (Load Resistance Factor Design)
  • AASHTO LFR (Load Factor Rating)
  • AASHTO LRFR (Load & Resistance Factor Rating)
• Kanada Highway Bridge Design Code (CHBDC)
• Hint Road Congress (IRC) köprü tasarım

Yazılım ayrıca kontrol amaçlı, farklı tasarım ve metodları karıştırabiliyor. Örnek olarak Amerikan versiyonunda LFD/LFR ve LRFD/LRFR spesifikasyonları değiştirilerek kullanılabiliyor.

ABC Sihirbazı ile Köprü Modellemesi Çok Kolay. Aşağıdaki filmi izleyin!

2 ve 3 Boyutlu Görselleme ile Köprü Modelinin Kontrolü:

Köprüyü profilde, yandan ve kesitlerle görselleyebilirsiniz. Katı ve şeffaf model görsellemeleri mümkündür. Ayrıca 3 boyutlu geometriden 2 boyutlu görünümler, altyapı bileşenlerinin çizimleri - boyutlandırmaları ile birlikte alınabilir ve DGN veya DXF formatlarında kaydedilebilir.

3 Boyutlu görünümde yapıyı tüm detayları ile - çelik donatılarına kadar görselleyebilirsiniz: boyuna donatı, kesme donatısı, ardçekme tendonları, v.b. Ayrıca inşaat aşamalarının da kademe kademe simülasyonu gerçekleştirilebilir.

• 3 Boyutlu Görselleme Seçenekleri Tanıtım Filmini İzlemek için Tıklayın.

Unified Database Ensures Project Consistency and Accuracy

All project information is recorded and stored in a LEAP Bridge database. This unified database facilitates the software’s parametric design capabilities as well as the exchange of data with other BrIM-enabled solutions. Changes to the design trigger updates throughout the project, eliminating the need to make multiple, time-consuming corrections to all project components.

Integrated Design and Analysis Streamlines Workflow

LEAP Bridge Enterprise provides a unified environment for the design of superstructure and substructure. It delivers accurate and efficient solutions for pier and abutment design, automating layout, analysis, and design of integral/monolithic piers as well as stem wall or pile cap abutments. Results from superstructure analysis are taken directly to the substructure model.

BrIM and LandXML Compliance Offers Direct Data Exchange

LEAP Bridge Enterprise uses BrIM technology to directly communicate with other Bentley solutions, including MicroStation, Bentley InRoads, GEOPAK, MXROAD, and more. In addition, LEAP Bridge Enterprise is LandXML registered and certified, enabling users to directly exchange information such as horizontal alignments, vertical alignments, cross sections, and roadways with other applications that support LandXML.

Project Information Management Protects Data Assets

LEAP Bridge Enterprise can be a data command center for your bridge projects. Reciprocal data exchange provides not only a seamless mechanism for information modeling, but also ensures the reuse and preservation of critical bridge information.

Drawing and Reporting Tools Automate Deliverables Production

A drawing tab automates the generation of drawings based on the final designs created using the LEAP CONSPAN and LEAP RC-PIER modules. Drawings can be generated in MicroStation DGN format. User options are also provided for specifying border templates and symbology – commonly defined as *.dgnlib by most U.S. state departments of transportation. Report generation options make easy work of publishing project information. Reports can be printed, saved as HTML files, or exported to spreadsheets.

AASHTOWare Integration Boosts Project Startup

LEAP Bridge Enterprise is integrated with the AASHTO BRIDGEWare database to ensure easy reuse of information and eliminate data entry that can take precious time.

Integrated Bridge Solution Improves Project Delivery

Bentley is committed to providing tools that help engineering professionals design and deliver high-quality, sustainable infrastructure. LEAP Bridge Enterprise is a major offering within the Bentley bridge solution, which also includes world-class applications for road design, digital terrain modeling, bridge design, structural engineering and analysis, steel and concrete reinforcement detailing, and bridge load rating and analysis. LEAP Bridge Enterprise is compatible with ProjectWise, Bentley’s platform for connecting people and information across project teams.

Running LEAP Bridge Enterprise with ProjectWise and/or ProjectWise Navigator, users are able to perform a synthesis of bridge information modeling, continuously sharing, reusing, and repurposing data. They enjoy the many benefits of real-time collaboration and streamlined engineering content management – working across multiple locations and time zones, among numerous contributors, companies, and stakeholders. Users of the Bentley bridge solution enjoy the full benefits of a real-world solution for delivery, maintenance, and operation of bridge systems – improving ROI in data at every step of the bridge lifecycle.